AHHH a mythical beast? Dragon Puzzle / How to Train Your Dragon Puzzle DragoneyeJo
Description
Why did the dragon bring a pillow to the knight’s fight? So he could have a soft landing.” This puzzle of a Dragon consists of 17 pieces. The Dragon Puzzle is an original gift for kids and a beautiful decoration for your home or office. For kids aged 3 years and over. ATTENTION! Use it under the supervision of adults! This Puzzle took 2 tries, and about 8 hours to create. I had to ensure that there was enough space between each part to come apart and be put back together easily. I also had to make sure that certain parts weren't too small. 3D MODEL DESCRIPTION Wearing one of these keychains is a statement in itself. Period. This STL file is recommended for FDM Printers! 3D Printing Time Based on Kobra 2 Max 09.00 Hours (will vary according to your printer model) Difficulty level: 9/10. If parts come unstuck from the bed, they must be reprinted. Adding an outer brim can solve print adhesive issues. I didn't need the outbrim in my case. 3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.24 mm / 100% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s Recommended Initial Layer Height: 0.16 mm Recommended Layer Height: 0.16 mm Recommended Perimeters/ Walls: 2. Recommended Infill (%): 10% (Gyroid) Needs Support: No. Build Plate Adhesion: No. The parameters above are recommendations made by DragoneyeJo Happy Printing!
Statistics
Likes
0
Downloads
1