Case for the Radxa Rock 2A SBC
Description
# Case for the "Radxa Rock 2A" Single Board Computer The main features of this enclosure are: - Tightly assembled with all the connectors easily accessible. - No screws needed, thanks to *snap joints* base and lid "click" together without the need for screws or other aids. - The circuit board is neatly clamped between the base standoffs and the lid push-downs. - Optionally, you can easily add round self-adhesive feet of 10mm or less. - Two variants available: with or without a cutout on the lid to access the GPIO pins. # Notes - To close or open the enclosure, gently press the base with your fingers near the snap joints to facilitate the process. Be careful not to bend the lid during removal or insertion to avoid breaking the standoffs. - To remove the SD card, you can use a small flathead screwdriver instead of your fingernail.
Statistics
Likes
0
Downloads
0