PlayStation GunCon 45 Trigger Mod
Description
There are a few 3d-printable guncon trigger mods that add in a microswitch to the GunCon 45 to give the trigger a more "arcade" style feel. I had already purchased my microswitches, and found that none of the existing prints suited my needs, as I was doing a 'drop-in' style switch, that left the gun unmodified, and just added the switch in the suitable location for activation. While technically this may cause misfires, I haven't noticed any issues. You could easily solder the wires to the connections as needed if you wish, but I wanted to make sure this was suitable for both 'drop in' and 'modified' variants. In any case, I printed this on a decent resolution and it only took 20 minutes. It is designed to have some double-sided tape under the print (for the recess and adhesion). I also used UV resin in the holes to hold it in place.
Statistics
Likes
0
Downloads
0