Rubik`s dice cube v2
Description
This is a famous engineer Rubik puzzle cube. I'm designed this model myself in FreeCAD. As opposed to previous version with tolerance 0.2 mm this cube has a zero tolerance between parts. It has a next parts: 1 core 6 center "cubes" 8 corner "cubes" 12 edge "cubes" 6 pins for connect center parts to core 189 small dots in different colour. There are some zip-files for your convenience - it has a whole plate of parts with supports (not made by slicer). Before assembling the cube, you need to remove the supports with a knife. Instruction of assembly: 0. Insert small dots into holes in each cube with glue (Dichloromethane for example). 1. Connect each pin into center "cube" with a click sound. See that a hole in center cube has a groove and a pin has a skirt. 2. Insert a central cube with number 6 into the core with a click sound. 3. Put this part on a table and assembly all of cubes (4 edges and 4 corners) with number 6. 4. Insert another 4 central cubes (number 2, 3, 4, 5) into the core. Note, that sum of dice number on opposite sides is 7 (1:6, 2:5, 3:4). 5. Put 4 edge cubes at a middle plane in according order. 6. Put 4 edge and 4 corner cubes with number 1. 7. Insert a central cube with number 1 into the core with a click sound. For the best result, it is necessary to lubricate the internal rubbing parts with Teflon grease. You can also apply acrylic paint to the inner points using a medical syringe.
Statistics
Likes
0
Downloads
0