Updated Forward Tesla Lowering Links (Longer)
Description
DOUBLE UPDATED VERSION: The new design is similar to the rear lowering links. These are less likely to shear when they are snapped on and off of the ball joints. Second update: No longer the wrong size, and the weird artifacts in the middle have been removed. These are lowering links of various lengths that replace the stock links that came with your air suspension. You'll find a link at each corner of the car. Select a new link length to adjust the ride height of the car at that corner. The links in this project are for the front of the Model S car (all years). See another project for the rear links, which are 20mm longer and a different design. Best printed in PETG, due to its springiness. Should be printed at 100%fill and ~0.25 mm layer height - thicker layers produced stronger results. The number in the file name is the distance from ball-center to ball-center 60mm is EVEN LOWER that previously available. 62mm is probably the lowest you want to go and maintain your ability to drive your car. more details are available on the older lowering links page. Print Settings Rafts: No Supports: No Resolution: 0.25 mm Infill: 100% Notes: Use PETG for its springiness. ABS is second best.
Statistics
Likes
0
Downloads
0