3D Scanning Scanner Markers | Dodecahedron
Description
Nothing Special, just a couple of different designs for markers, all marker bases have a slot for a 2mmx10mm magnet that you can glue in, i was going to have one that was internal (that you pause your print to insert magnet) but thought a lot of people don't know how to do that, and also makes it harder to get your magnet back. if you haven't discovered using b7000 glue, buy some its dirt cheap, and great for these magnets (and so many other things) the dodecahedron on the base, has a 2mm rod, you can make those rods any height. i print out of ABS, but you can obviously print these out of anything you want. I made the trapezoidal one with a really wide footprint so that the markers face up a little bit more than the traditional ones, also made it have enough space for a marker on the top. All circle depressions are for 10mm diameter reflectors but can obviously work for smaller ones, my einster says 6mm for all the markers but the marker itself, including black surround, is 10mm.
Statistics
Likes
0
Downloads
0