Everbilt D688 Bottom Mount Slide Socket Bracket
Description
This is a custom rear mounting bracket for Everbilt drawer rails. This bracket mounts to the rear wall of the cabinet and supports the drawer slides. This works with the D688 series Everbilt Bottom Mount Slide Set which comes in lengths from 12" to 22". This is based on the dimensions of a different bracket found on Thingiverse, "Everbilt drawer bracket clone", by user Gunsling. This source bracket design was missing the retaining lips to hold the rail in place and the curved end of the rail would not fit into the socket correctly. I used the basic base design and socket length, but expanded the socket to accommodate the curved end of the rail. This was printed using Creality PETG filament with standard settings using my QIDI Tech Q1 Pro. No supports are required. This was designed using Onshape and is public. Using your free account, you can copy the design and modify it if desired. Or you can just look at the methods used to create these designs. The link to this design for public 3D viewing or copying is: https://cad.onshape.com/documents/db71610773b3e5ee3670552d/w/820d77200da7d8beb510e1b8/e/8a0d975d6b2423d38cac1640?renderMode=0&uiState=66fcbd5488d7530291e067e9 This design is public and there are no restrictions on its use for any purpose, whatsoever.
Statistics
Likes
1
Downloads
17