Resin printer heater for Anycubic M3 Max
Description
I designed a heater for the Anicubic M3 Max. It also fits other printers. The base area is 65mm x 65mm. You need the following things to build it: 1 of these thermostat W1209 DC 12V: https://de.aliexpress.com/item/1005007476010973.html?spm=a2g0o.order_list.order_list_main.46.21ef5c5fRzfArX&gatewayAdapt=glo2deu 2 of these heat sinks 50mm x 50mm x 15mm: https://de.aliexpress.com/item/1005007356034193.html?spm=a2g0o.order_list.order_list_main.40.21ef5c5fRzfArX&gatewayAdapt=glo2deu 1 of these sockets for your power supply: https://de.aliexpress.com/item/1005004868796024.html?spm=a2g0o.order_list.order_list_main.35.21ef5c5fRzfArX&gatewayAdapt=glo2deu 1 of these 50mm x 50mm x 20mm Fan: https://de.aliexpress.com/item/1005002949019021.html?spm=a2g0o.order_list.order_list_main.28.21ef5c5fRzfArX&gatewayAdapt=glo2deu 2 of these heating elements 50mm x 20mm x 5mm(12V 60°C): https://de.aliexpress.com/item/1005007421725872.html?spm=a2g0o.order_list.order_list_main.16.21ef5c5fRzfArX&gatewayAdapt=glo2deu 1 of these switches 10mm x 15mm: https://de.aliexpress.com/item/1005003250475310.html?spm=a2g0o.order_detail.order_detail_item.2.10a26368H1dyPd&gatewayAdapt=glo2deu 1: 12V 5A power supply 2: 3mm LED (red and green) with resistors for 12V and some wire, shrink tubing, two M3x25 screws and washers, thermal paste and screws from old PC Fans Power consumption is around 27 watts while heating. I connected it so that when the switch is on, the fan runs permanently and the green LED is on. If the temperature falls below the set temperature, the heating element and the red LED come on. I will not create a connection plan, those who do not know how to connect something like this should seek help from someone who knows about electricity.
Statistics
Likes
0
Downloads
9