(Limbus Company) Vergilius Blade
Description
Hello everyone it's been a hot minute, but I come with a gift! Vergilius' Sword! Technically this is a spoiler for Canto 6 and Leviathan (RIP) but only if you know already. As of right now, I have a rather large queue of items I want to make, starting with -Limbus company sinner coins (basically the coins from the game but with the sinners' symbols on them) -Queen of Hatred's staff from Lobotomy Corp and Library of Ruina -Twilight from Lobotomy Corp -Solemn Lament (specifically the one shown in ruina because its more detailed) -Don's lance (I am trying to make it a locking telescopic lance but that isn't proving easy to make) -Ruina/Lobotomy Corp coins -Da Capo from Lobotomy Corp. I have been working on the coins but they have been a drain to try and make so I decided to make this as something quick and easy. I have taken the liberty of splitting this into multiple parts to make it easier to print. I have also made two separate versions due to it being very difficult to discern whether there is a guard on Verg's sword or not (V2 is the one with a guard). Use whichever you prefer or both! FOR PERSONAL NONCOMMERCIAL USE Reupload from my Cults, https://cults3d.com/@MrHShroud Anyways, be sure to rate and follow! Leave suggestions in the comments on what I should make next. Suggested Print Settings (but feel free to print at whatever settings you want): Resolution: .2 .2 infill 60 mm/s If you happen to have red/orange translucent filament I would recommend using it for the blade part ASSEMBLY: The sword requires 3 10mm wooden dowels as internal supports. If you feel so inclined, you can print them, but I wouldn't recommend it. Each dowel needs to be 40mm in height. Glue the dowels into the holes on the handle and middle body Then glue the parts together, I recommend superglue for PLA.
Statistics
Likes
3
Downloads
36