Bambu Lab X1-Carbon Poop Chute - Removable Bin and Tray

Description

This is a modified / remixed Bambu Lab X1-Carbon 'Poop Chute'. The original un-remixed design is here: https://www.printables.com/model/481279-bambu-lab-x1-carbon-poop-shoot-removable-bucket Sometimes a large print with multiple colours can result in more filament poop than the tray will hold. Therefore I altered it to allow you to remove the whole bin part, leaving just the chute where the filament can go straight into a larger bin below (see pictures). All held together by magnets and magnets will hold it in place onto the 3D printer. The small tray is also removable and just slides out for easy emptying. You'll likely be printing on an X1-Carbon, and there is a 3mf file within this design for this printer and you can print all parts at once. The filament I used is: Zero PLA Silk - Silver https://www.amazon.co.uk/gp/product/B08BG4NR73/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1 The magnets I used were: 8mm x 2mm Neodymium magnets: https://www.amazon.co.uk/gp/product/B08R5X5GQ8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 No support or anything needed.

Statistics

Category

Tags