Kyber Crystal and mount for DJ Kenobi Saber
Description
Update 1 - 25/1/2025 Im aware the housing around the kyber crystal is a bit too long, revised part will be available soon ( it still looks and functions 100% without it; See pics) Kyber manifold has a hollow tube and space for a 3w LED to be installed to illuminate the crystal. Firstly i am not the designer of the Kenobi Saber - that peice of art was by DanielJosvai https://www.thingiverse.com/thing:3613324 and Original model by Jacky Wan: https://www.youmagine.com/designs/star-wars-lightsaber-complex-version Secondly i did not design the individual pieces i simply modified and peiced together to suit the above saber, all orginal files can be found below from the legend designers. Manifold simple - https://www.thingiverse.com/thing:4737722 by countspatula Cooling Fins Housing - https://www.thingiverse.com/thing:4737722 by countspatula Crystal Focus Mount -https://www.thingiverse.com/thing:4737722 by countspatula Kyber Krystal Raw form - https://www.thingiverse.com/thing:5475430 by Roselerfamilyprinting This is just my little personal customization to already great prints. Fitting is easy - no mod to the original Kenobi saber model by DanielJosvai. i designed this to fit and be glued to the top of his Heatsink. 3 part print 1. Manifold 2. Cooling Fins 3. Crystal (print in transparent) I printed in Resin (8k elegoo) with the below: Resin Settings First exposure - 30 Normal exposure - 2 First layer - 4 Layer height 0.05 Supports - Light FDM Settings Layer Height - 0.2 Layer Height (Crystal) - 0.12 Filament - PLA Adhesion - Brim Supports - Tree 8% (this can be difficult for the manifold) Speed (Manifold only) - 20 This is a V1 so may had some discrepencies between print medium types so please let me know. Instructions Place the slip ring around 5mm below the inside rim of the Kenobi heatsink (a dab of super glue is good) once thats done you can insert the bottom rod of the manifold into the slip ring. this will hold it all in place while you assemble the kenobi saber. once the clamp etc is on you can insert the kyber crystal and then place the fins housing over the top - the rest of the light saber should assemble now. Thank you to the OG's
Statistics
Likes
0
Downloads
4