Bridge generator for Ikea Lillabo (Brio and others)
Description
This is a remix from https://www.thingiverse.com/thing:5598668. It uses that track generator to generate the tracks in the bridges. While the models posted here are for the Ikea Lillabo system, the previous track generator allows to adapt the bridges to other systems. There are some solutions for bridges for lillabo, brio, etc but none of them really worked for me. We were after a brides that can be: - printed without supports - printed in a 3d-printer with a small build plate - customizable Since there is nothing out there that meets all three, I designed my own. I attached 3 different whole bridges (for illustration only, not to be printed) and individual pieces for two of them. Specifically - Pieces for a bridge with a slope of 17 degrees that uses standard 146mm (not counting the plug) straight tracks and has the standard height of 65mm - Pieces for a bridge with a slope of 22 degrees that uses standard 240mm (not counting the plug) straight tracks and has a height of 130mm The other bridge has 20 degree angle and uses 100mm straight tracks (not counting the plug). Individual bridge pieces ended up looking very similar to the ones here https://www.thingiverse.com/thing:608012 I'll post the scad files with instructions about how to generate custom bridges if there is enough interest.
Statistics
Likes
0
Downloads
4