Bosean FS-5000 housing for SBT-11A tube
Description
Hello, this is the housing of the Bosean FS-5000 dosimeter for the SBT-11A Geiger tube. Attention! The design assumes installation of the Geiger tube without its original housing. To remove the tube from its housing, place it in a container with isopropyl alcohol vapors for 30 minutes, this will dissolve the glue holding it in the housing. Then cut the 5 wires going to the connector pins, and carefully remove the tube from the housing. Setting up the device for a new Geiger tube involves using the RadPro firmware.
Statistics
Likes
0
Downloads
0