LED Lighting for Anycubic Vyper Dual 5015 V2 Rev2
Description
A simple little holder for two 5mm LEDs to illuminate the nozzle and the hotbed/part. Because the original LED has to be removerd when installing the Anycubic Vyper Dual 5015 V2 Rev2 https://www.thingiverse.com/thing:4974423 I designed a replacement holding 2 LEDs. The part needs two M3 heat-inserts, I used Ruthex M3S and two M3 screws to fasten it to the coldend-fan (4020). For the lighting I use 2 LEDs 5mm diameter, ca. 3000K which I soldered in series to each other and connected them to he original LED-socket. The flat part that bridges both sides is designed to channel the coldend-airflow away from the hotend. Printed in Eryone PLA+ black with 0,2mm LH and 0,4mm nozzle. In the FreeCAD-file I put together the Dual 5015-cooler, the hotend, the coldend-fan, a self-drawn backplate (Vyper C!) and this model to show the assembly. You might find this useful to modify it or to do own works - but don't only rely on this, it might not be a complete and correct model of the reality! (but better than nothing :)
Statistics
Likes
0
Downloads
1