![Shoe Hanger Attachment for Hanging Shoes on The Hook for Hanging Stuff [scaled and reinforced]](https://3dcrawler.ams3.digitaloceanspaces.com/thingiverse/6925325-Shoe-Hanger-Attachment-for-Hanging-Shoes-on-The-Hook-for-Hanging-Stuff-scaled-and-reinforced-243330355.jpg)
Shoe Hanger Attachment for Hanging Shoes on The Hook for Hanging Stuff [scaled and reinforced]
Description
Since i hung my clogs very near to the floor just that much, so my Vacuum Robot could drive below them, it became very fast a game for my cat to rip these down. The difference to the original is: - Scaled to 11%, not 10% like SamRecio said in a comment. 10% leads to bending of the material, which probably leads to break eventually - Used PETG, not PLA, if you want to use PLA, increase the infill to 50-60% - Added screw holes, so it doesnt get ripped down, when e.g. a cat is grabbing the shoes :D There are two versions, one with the screw holes facing forward, like in the original post and one with the screw holes facing backwards, which i've printed for my purpose. I used 3x12mm wood screws.
Statistics
Likes
0
Downloads
1