Bambu Lab External Filament Cardholder
Description
This is a device that holds cards that identify the filament externally used by the Bambu Lab printer. The size of the cards are 42.3 mm x 76 mm which corresponds to a 1/3 of a 5 x 3 inches index card. The numbers are highlighted using a Sharpie. A template that lets you print 3 cards per index card is also included. A brim is required. It should be printed upright without support. An infill of 20% is recommended. This object's main web page is: http://www.ctheroux.com/bambu-lab-external-filament-cardholder/. This object was designed using Solid Edge Community Edition. You can request the source files on the page listed above.
Statistics
Likes
0
Downloads
1