Tamiya Subaru Brat parts
Description
Some items you might like: 1. End plates for the battery compartment to guide the cables away from the body and add a small 2.4Ghz antenna. Made for NiMh-style 2S Lipo pack. 2. Receiver mounting. You can click it on but better to disassemble and slide the rods in. After mounting the receiver you get easy access by simply removing two screws and rotate the mount so you can plug in wires, press buttons, etc. 3. Some 0.2mm and 0.4mm shim plates to make the rear arms spin freely without cutting up the parts. You might need to modify the initial layer height to get two layers, depending on your nozzle size.
Statistics
Likes
1
Downloads
2