BB Shooting Stock Spacer Kit
Description
This is a stock spacer kit for the Daily 499B, used in competition and Project SAFE. It is useful to help adjust the length of pull of the stock, and make it adjustable within a range. It's particularly useful as kids grow. The nut plate holds 5, standard 1/4-20" nuts against the cut down butt stock. For competition rules, it is important that the rear of the butt stock be the same as the original configuration and this allows that. 1/4-20" Hex-Drive Cap screws (2", 3", and 4" are typical) - are used to hold the piece in place. 1" decking screws are used to hold the plastic to the wood. Be sure to print the nut plate at full-strength/density.
Statistics
Likes
0
Downloads
1