Scintillation Detector Mount For Extendable Pole/Wand/Tripod (Fits 1.75" OD Detectors)
Description
Scintillation Detector Mount that can be attached to a pole, wand or tripod. The mount can accommodate detectors with 1.75" ODs. The mount allow you to rotate the detector and lock it into place with the pivot joint along with the device fixture set screw to change the center of gravity and angle to fit the users needs and comfort. Three versions are available, V6 has a split tongue pivot point while B1 has a side by side offset pivot. B1 was created in an attempt to provide extra stability. However both versions are very robust. V2 has the pivot location centered on the device fixture and can be used if your detector has different weight and handling characteristics. Reinforced arm fixture has been added as B1 V2 file. The upper arm fixture has a pivot point opening for M6 or 1/4"-20 bolts along with the mounting hole at the top sized to be tapped for a 1/4"-20 or M6 bolt. (Standard tripod mounts use 1/4"-20 thread sizes for their mounts) The device set screw has a lofted hole sized for a M4-8mm threaded insert for better stability and biting force when the detector is in place.
Statistics
Likes
0
Downloads
2