Schumacher Rear Pivot Blocks 1/8
Description
Rear pivot blocks (U1129) used on a variety of vintage Schumacher buggies/vehicles (CAT XLS, Procat, Topcat, Cougar, Cougar 2, etc.). Ream the screw mount with a 3 mm drill bit - threading a M3 screw will probably be more than sufficient. Very carefully clean the hinge mount with a 1/8" drill bit. I recommend doing this by hand and/or working the bit in reverse. The intent is to clean out the hole. After finishing clean up, hand fit the pin/screw to confirm the hole has been fully cleared. When printing, ensure your supports can be cleanly removed or print it without.
Statistics
Likes
0
Downloads
1