Original Xbox Test Bench Sidecar and Hard Drive Caddy
Description
A station to allow for easy access to the IDE and LPC interfaces of an original Xbox. Useful for testing SATA adapters, modchips and hard drives without the hassle of an open top console and messy wires everywhere. You can feed your cables any way you want, but I ended up cutting a square out of the side of the console and then using the Cable Channel piece to keep it clean looking and reduce friction on the wires. The Cable Channel is intended to slip onto the edges of the metal RF cage which will also need to be cut. If you plan on using the external modchip station, you will need to wire the D0 point on the motherboard to ground to force booting from the LPC, or run an extension wire outside the console to the chip if you prefer the mochip to pulse the D0. Recommended cables: LPC Extension: CablesOnline, 6-inches 14-Pin (2x7) 2.54mm-Pitch IDC 10-Wire Flat Ribbon Extension Cable, FR-1406M https://www.amazon.com/gp/product/B0C3V1FRZH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 IDE Cable: CustomXboxDirect 22 Inch 80 Wire Ultra IDE Cable https://www.etsy.com/listing/863602662/original-xbox-sata-hard-drive-upgrade?click_key=d28e292ddc6cd8bb486bbfff167c0fecfb48492b%3A863602662&click_sum=8dc35823&ref=shop_home_feat_4 MOLEX Power Extension Cable: Coolerguys 4 Pin Molex Sleeved Fan Cable Extension 36 inches https://www.amazon.com/gp/product/B07D3HXL1T/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Statistics
Likes
1
Downloads
1