Fork Insert for Argos Portafilter for LAGOM 01 Coffee Grinder
Description
The portafilter stand on the LAGOM 01 was originally designed to fit standard E61 and LM portafilters. This is a modified fork insert designed to accommodate the portafilter on the Argos (Odyssey Espresso), which is slightly smaller than the standard 58mm portafilter. During testing, it has been found to work well with PLA or PLA+ materials, as the temperature of the portafilter is typically not high enough to soften these materials. However, proceed with caution, as different espresso machines and user routines may vary from the tested conditions. Recommended materials for printing: PLA, PLA+, or higher-temperature-resistant materials such as PETG. Infill percentage: Default (15%–60%). Instructions: 1. Print the fork insert. 2. Remove the original fork insert from the portafilter stand by loosening the hex screws. 3. Install the new fork insert and test it. If you encounter any issues or have requests, feel free to leave a comment.
Statistics
Likes
0
Downloads
1