Fujitsu Futro s940 wallmount
Description
A simple wallmount written with open-scad for the Fujitsu Futro S940. Two holders (green in the overview) gets screwed with M2.5mm screws to the bottom of the S940. It can then slide into the wall mounted rails (blue). An optional distance plate (brown) can be used for better cooling and/or cables between the wall and S940. I printed with PLA+, 30% infill, 0.4mm nozzle, layerheight 0.2mm. Find the openscad project on github: https://github.com/FauthD/futro_s940_wallmount
Statistics
Likes
0
Downloads
1