SourceOne V5 Go-Pro Mount (22mm front/ 20mm back)
Description
Go Pro mount for chassis *SourceOne V5*. Quotes for the holes are attached. I tried to make it robust but still the middle finger can break. Tollerances are made for bad printers from 6+ years ago. If others drones have similar chassis: - the front holes are 22mm apart, - the back holes are 20mm apart, - front and back holers are 30mm from each other. **As screw I used a M5x25mm** like this https://amzn.eu/d/ckbRNcR (these are probably too much expensive, buy them from your trusty hardware store). **M5 nut is required**. Please comment if you have tips for maybe improving it
Statistics
Likes
0
Downloads
1