Frsky TDSR10 Receiver Mount and Antenna Mounts
Description
This will hold a Stabilized receiver firm within the rails and give you access to the pins and bind button and antenna wires. I made this for a stabilized receiver so it cant move at all. This can also be used for a standard TDR10. The Velcro strap channel is relieved on the bottom side so it can be flat mounted or use some stand offs if needed. The antenna mounts lets you place the 3 antennas where it will work inside the airframe with good separation of the 3. I used PLA Pro, works well. The step files lets you modify if needed the fit of the receiver body into the mount as needed. I used Fusion 360. I have lots of other mounts for the Frsky receivers. I included a pic of the remote antenna mounts I have in another plane using a different mount. The only dif in the 2 mounts is the stabilized version holds the receiver snug and still.
Statistics
Likes
1
Downloads
0