K-Cup Dispenser - Wall Mounted
Description
Printing Instructions: - Print standing upright, with tree supports enabled for the lower overhang. All other overhangs should not need supports as they are angled 45 degrees or greater. Mounting and Orientation: - I mounted mine using two horizontal 3M Command Strips as seen in the uploaded photo, leaving the tabs sticking out the back. - The primary STL model will mount as seen in the photo, with the mounting surface on the left and opening slot on the right. A mirrored version is also provided. Clearance/Jams: - My print works without issue, but if you find your K-cups jam, let me know and I'll create an updated version that is a bit wider.
Statistics
Likes
0
Downloads
0