Klappvisor Bascinet
Description
This is the first 3D model I'm uploading and I am not a professional 3D designer. However I wanted a bascinet helmet and wanted to make it by myself and these are my results. WARNING: the current STL file I put here contains the full bascinet helmet with visor. Verveilles (little holes on the lower part of the helmet) and intersections (which I made to glue the parts together) can be found under "Bodies", while the parts of the bascinet itself are under "Bascinet" -> "Bodies". The visor is split in two different parts too and everything has a width of 2mm. If you don't know what a klappvisor bascinet is, it's a helmet mainly used in 14th century that has a visor attached only on one central hinge. The visor in this case is rather flat. The visor perhaps moves a little too easily, so there will be some updates because I don't want to use the leather strap to keep it on place when lowered. I suggest to print this with a strong plastic (I used PETG).
Statistics
Likes
0
Downloads
0