STFU NOOB Fridge Magnet
Description
This is sliced into three parts (bottom, middle, and top). This is to allow for a stack of two 25x2mm magnets to be embedded and for color change on top. Load all STL files into your slicer, and choose to treat them as one object. They should automatically stack correctly. Turn OFF supports! You will be supplying the only support - the 2 magnets. Select two filament colors in your slicer. Assign one color to bottom and top. Assign the other to middle. This should generate the gcode commands for your printer to pause at the right times. FIRST PAUSE: Place two 25x2mm magnets into the middle cavity. Resume print. SECOND PAUSE: Change color for your top design. Resume print. WARNING! This may not go so well if you are not using a brass nozzle. Magnets want to stick to things, and they will be stuck very well to your bed, but... don't give them any reason to decide otherwise. This is an original design, built in Fusion 360 in order to teach myself how to get around in it. If there is any issue, let me know. This is the first print I'm ever sharing.... making me... a NOOB! Design Tool: Fusion 360 Slicer: Orca Slicer 2.1.1 (no supports/rafts/brims, 0.2mm, outer/inner walls Printed on: Elegoo Neptune 4 Pro Printed in: eSun PLA+
Statistics
Likes
0
Downloads
0