RC4WD Trail Finder 2 Toyota HiLux / Mojave (284mm / 11.2" WB) Body Mounting Floorboards.
Description
Here's my body mounting plan that doesn't involve screws in the body sills. M4 x 16 stainless steel grub screws reduced to 3.2mm diameter for 5mm, 3D printed floorboards, (this TF2 was a second hand box of bits and didn't come with body mounts anyway) spread the bottom edges of the the body and spring it over the protruding unthreaded section. Seems pretty firm even without the rear body posts. Some people use M3 grub screws but vibration over time chews out the holes in the body sills which is why I used M4 grub screws turned down to give a smooth parallel section. If you don't have access to a lathe to turn down M4 grub screws I've also saved a version with Ø3.00mm holes so you can simple press in a 20mm length of Ø3mm steel rod.
Statistics
Likes
0
Downloads
0