Lionel Truck and Wheels, Version 1
Description
A complete Lionel, O Gauge truck, wheels, and axle. Please read all the information below. I printed the parts in differnt colors so you can see how it goes together. Multiply all of the parts by 25.4 (to convert from inches to millimeters). There are three different designs. The main truck is the same for all of them. The difference is the sides and the axles. Version 1 is made to use the axle included in the print. Print the wheels and axle in .1 resolution, at lest 25% infil (50% would be better). Also, it may be helpful to set the Z Seam Alignment to "Random" or "Hide Seam" In the Slicer program; (Shell > Seam Alignment > Random) The main part of the truck can be printed at .15 or .2 resolution. The trucks can be mounted to the train body with #6 machine screws and nylon locking nuts. There is a .5 inch and a .8 inch bushing included for mounting the truck to the train body. You may not need them. The sides can be mounted with #2 - 3/8" sheet metal screws or glued to the truck. Side A can be printed upside down to avoid using supports. Side B is a little more detailed and will need support. A small round file and a small flat file will be handy to file out the center of the wheels and axle supports. Lightly sand the wheels and axles to ensure they spin freely.
Statistics
Likes
0
Downloads
0