Duet Tool Distribution Board Case & Mount
Description
A case for the Duet Tool Distribution Board v0.5 (the only version they have as of Jan 2025) that allows the Tool Distribution Board(TDB) to be mounted with M5 screws. The case has a bottom plate that needs M3 heatset inserts. I used the small ones, diameter 4.5mm, length 4mm from Ali Express, but others less than 5mm in diameter should work too. The top clips in by slightly deforming the sides so the two tabs lock in with the two clasps on the bottom. I printed in both PLA 3D870 and Fusion Filament's HTPET and the sides were able to slightly deform in order to lock together without the layers delaminating. As long as you don't print with anything super stiff like a carbon fiber blend they should come together just fine. I printed with a 0.6 nozzle and 0.2 layer height with a height modifier at 26.6mm-28.6mm changing the layer height to 0.1mm. I don't think this is strictly necessary but the filament I used tends to sag on overhangs and I wanted the tabs on the top to come out crisp.
Statistics
Likes
0
Downloads
0