Key wall Holder
Description
A functional and stylish wall-mounted key holder designed to keep keys organized and easily accessible. Printing Settings: -Print Quality & Detail: Layer Height: 0.2 mm Provides a good balance between fine detail and print speed, ensuring smooth surfaces without excessive print time. Structural Strength: -Walls: 2 perimeters Standard wall thickness that maintains durability while keeping material usage efficient. -Infill: 15-20% Offers sufficient strength while keeping the model lightweight. A grid, gyroid, or cubic infill pattern is recommended for optimal strength. Material Choice: -Material: PLA Ideal for indoor use; easy to print with minimal warping. If extra strength or heat resistance is needed, PETG could be considered as an alternative. Support & Adhesion: -Supports: No support required -Bed Adhesion: A brim or skirt might help with first-layer adhesion, depending on the bed surface. Recommended Print Settings: -Print Speed: ~50-60 mm/s for a balance of quality and efficiency. -Cooling Fan: On (100%) for better overhang performance and detail retention. -Nozzle Size: 0.4 mm (standard), but a 0.6 mm nozzle can be used to speed up printing with slightly reduced detail.
Statistics
Likes
0
Downloads
0