WALLBOX PLUS EV Charger cable holder
Description
I decided to design and print a cable holder for my Wallbox plus charger. It worked out awesome! it keeps the weather off of it. Also makes it more difficult for someone to steal as the screws are covered. Print settings: 25%+ FILL / material PETG. Printed on Elegoo max... ADVICE: Use the rear print as your drill template. Just hold it up or tape it to the wall and use a pen/pencil to mark your mounting holes. Cover your Wallbox charger with a plastic bag or cloth to stop the dust from getting on your charger. Place a cardboard box on the ground to collect the drilling dust... easy clean up!!! guys.. Then assemble the two halves together.. I used an M3 tap for the holes in the front half and long M3 electrical screws to secure both halves together... Oh and one more thing!! DON'T drill TOO deep into your wall... use a piece of tape on your drill bit to set your drill depth a little longer than your rawl plugs.. you don't want to drill into your cable.... Be careful guys.. disclaimer! do this at your own risk.. or have a pro do it!! ;-) you.... You guys may use it for personal use!! if you want to use it for commercial use , please contact me through my Youtube page for how to proceed. https://www.youtube.com/@binkmoed Head over there and say thumbs up and subscribe please... cheers.
Statistics
Likes
0
Downloads
0