Pick-Rocket 2_ Xshot Micro Reshell // Nerf Attachment
Description
Hey hey fellow Nerfers! I present to you the Pick-Rocket 2 (or the “Tactical Brick”, as I like to call it). This is a reshell of the Xshot Micro 1.0 (the previous version). You can use it as its own blaster or as attachment for your Nerfs (for picatinny and N-strike). Note that the ergonomics are worse than its original form. The name is based on another Nerf blaster I made (my second one ever), but it just didn't work. So I made it's working successor. PRINT SETTINGS: -Resolution: 0.2mm -Supports: No (except for both N-Strike attachment pieces) -Infill: 20% at least -Plastic: mostly PLA // PETG is recommended for the trigger (but not necessary) -Other: No brim required You can find the instructions and other details into the pictures above. Anyway, for the assembly, you just need to use the hardware of the blaster itself: -the six screws (use the smallest screw only for the muzzle part) -the trigger spring (the longest one) -the plunger assembly (with the catch removed) Please note that you have to remove the catch from the plunger rod. Try to unpin it first or cut it off (I have 2 Micros, and it was 50/50). For the attachment parts (see pictures above), you need: -two plastic screws, 11mm max in active length, 5mm diameter for the head and 2mm for the body -two M3 nuts and bolts, 30mm minimum in active length, for the negative picatinny rail attachment The “attachment frame” pieces allow you to screw the rail parts onto PR-2 and do combos with Nerfs blasters or accessories. You can also combine the frame shapes as you like, so you can attach several PR-2s together or do other types off stupid builds. I haven't tested if it's compatible with the Micro 2.0's internals. That's pretty much for now. I'll update things if required. For now, I hope you enjoy and have fun with it! And happy Nerfing!
Statistics
Likes
0
Downloads
0