Servo Winch Platform for MJX H8H
Description
The platform for the servo winch is secured with m3 screws at four points (2 holes in the frame of the model, the other 2 holes must be drilled on the sides in the plastic support of the body, see photo) The platform has a hole at an angle of 55 degrees for a flexible tube or aluminum tube with an outer diameter of 6 mm, use whichever option you like best, but I chose a flexible tube from the Mercedes pneumatic system. The servo winch is fastened with 4 m3 screws of different lengths for better load distribution during winch operation. The holes have a diameter of 2.8mm and do not require additional screw fixation with a nut. There is also a hole for an Injora screwdriver for easy tightening of the lower screw in the front part of the platform. I wish everyone a good printing and pleasant use.
Statistics
Likes
1
Downloads
0