Filament Spool Holder 1 kg spools & 3 kg spools to attach to v-slot 2020, 2040 or 2040
Description
This spool holder prints in PLA or ABS without support. (See included orientation picture) In is intended to attach this spoolholder to vertical v-slot profiles sizes 2020, 2040 or 2040, for this it uses two M5 T-nut 30 Series, the square type, and two cap head screws, M5 x 10mm, but other M5 bolting to a frame or pane is possible too. For less spool holder friction and anti-wear, two short generic PTFE-tubes - normally used as filament-feed tube - with outer diameter 4mm and inner 3mm are slotted in the design. There are two filament spool holders: one for 1 kg spools and one for 3 kg spools. For printing, two to four walls are advised and 25% triangle infill or stronger.
Statistics
Likes
0
Downloads
0