Raspberry Pi Speaker for Raspberry Pi Respeaker 2 Mic hat
Description
This is a case for the Respeaker 2 Mic Hat used with either a Raspberry Pi 3 A or a Raspberry Pi Zero. I made this to house my Voice Assistant to be used with Home Assistant. For the grill cover I used scraps from an old tee shirts and glued the fabric to the grill cover insert. The grill cover will press in place and needs the fabric, or else it will not stay in place. You may have to do some tweaking depending on the tolerances of your printer. The back cover and Pi are fastened with M3 screws, the speaker is held with M5 screws. The feet are glued to the bottom using the recesses for refferance. Material Used: -PLA -Raspberry Pi 3 A or Zero -Respeaker 2 Mic Hat -2" Speaker with a JTS Ph2.0 connector such as https://www.amazon.com/gp/product/B0826Z3BMY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 -M5 Threaded Insert Qty 4 -M5 Screws Qty 4 -M3 Threaded Insert Qty 8 -M3 Screws Qty 8 -Thin cotton fabric
Statistics
Likes
0
Downloads
0