Weller fume extractor - 120mm fan add-on
Description
This is an add-on for the Weller fume extractor hose used in soldering. I am using a small desktop fume extractor in combination with a Weller hose for extra length. The extractor I am using has very weak power. Therefore, I created this addon to be connected to the Weller hose. One of my other designs includes a desk clamp and conversion piece for the two hoses. This model should work with any 120mm desktop PC fan. There is a small hole on the side for the fan's ribbon cable. Some soldering is required to re-connect the fan to a power source. I am using a 5.5x2.1 DC barrel jack: https://nl.aliexpress.com/item/1005004282758647.html?spm=a2g0o.order_list.order_list_main.47.545079d27LM8Ee&gatewayAdapt=glo2nld Note that the DC barrel jack mount and hole for the Weller hose are slightly undersized. You can either change the model slightly to fit your hose, or heat up the printed part using a hot-air gun for an airtight fit. The fume extractor I am using is similar to the following model: https://www.amazon.com/BAOSHISHAN-Extractor-Soldering-Absorber-Desktop/dp/B08P1T4WV5/ref=sr_1_41?sr=8-41 The Weller hose I believe to be using: https://www.weller-tools.com/us/en/filtration/products/arms-hoods-and-accessories/easy-click-60-extraction-arm-o-600-mm-length-10m
Statistics
Likes
0
Downloads
0