Ender 3 Max Neo Direct Drive Adapter
Description
Direct drive adapter for Ender 3 Neo Series • Ender 3 Neo Max & Ender 3 Neo Based on Drivinator concept but created from scratch. Printing: Print in current orientation with no support. Consider adding a brim considering the low amount of contact to the bed. Installation: Dis-assemble the Carraige and remove the extruder and extruder motor from their current positions Insert the Two Wheel spacers in the two bottom holes Attach Extruder and Extruder Motor Position in place temporarily to measure where to cut the PTFE tube to size Attach to Carraige and position back in place and attach and tighten wheels Note: You likley need a longer Extruder motor wire or extension (This is the only part to buy or make) • I.e. https://www.aliexpress.us/item/3256806231826727.html or https://www.amazon.com/Box3D-printer-stepper-extension-pvoxelab/dp/B0B3Y4MHYN Or just wire and solder yourself an extension (I.e. Cut the wires in the middle and attach similar wiring - Mark the sides on both pieces before cutting)
Statistics
Likes
0
Downloads
0