MiniDisc Stand for 10 Discs With Walkman Logo
Description
Recently got into MiniDiscs and conveniently 3D printing :) Thought I'd share my STL's modelled from Blender. Excuse the examples, they need finishing. I need to file the letters flat and get rid of some of rough bits. Sorry about the chunk in the middle too, it's based on my original case I designed to carry them around which I'll upload soon too. (Holds 5 Discs - PLA base, TPU lid fits snug) I just lumped them together to make 10X slots. Pls remix it as you please. Bases are printed with PLA High Speed but TPU will work well too @80% infill. Feet are printed with TPU but it's not very grippy so if there's a softer rubber filament out there, I'd suggest using that. Should be sized correctly. I've imported all models into Prusa slicer and exported one at a time into G-Code for print. I used an Anycubic Kobra 2 before its PSU went bang but the models are so generic they'll print easily on anything. (The text might be a little harder depending on your printer) For the logo and feet I used super glue (CA glue) I'd recommend using organic supports on the slots for the top / inside of the letters as they will droop slightly if your fan isn't very strong on your printer. They're very snug too so a little work may be needed for clearing the edges to fit the letters into. I heated mine up with a lighter and pushed the letters in when it became soft. Then once they fit I glued them. Just don't push too hard or it'll warp the base.
Statistics
Likes
0
Downloads
0