Bottleholder for BMW
Description
Made it for my BMW 116i (2009). Fits bottles with up-to 90mm Diameter (I use it mostly for regular 1,5L water bottles from discounter). Kinda hard to print due to the irregular shape. Use lots of Support-Material. I used too little support, which is why the print looks not that great in the images. I recommend to print the part in the same orientation as i did. DON'T print with PLA, it will soften and deform on hot summer days (don't ask how i know). I used PETG and it works fine. ABS should work too. There is a part which needs to be removed, so that the glove-box can close properly. It can be taken out without tools and needs to look like the last image, when done properly.
Statistics
Likes
0
Downloads
0