Straight GPS mount for drone / quad
Description
GPS mount for the back of the drone / quad . Specialty of this mount is that it is straight, with no tilt. For setups where GPS with compass is used. For easy compass calibration in iNav. You will not need to customize compass tilt angle. However you will need to check and if needed alter the compass orientation. Different variants available. With 4mm VTX antenna tube and with 5mm. With side accessory slots and without. Designed around 25x25mm GPS module BZGNSS BZ-251 Quad frame standoff diameter 4.8mm Standoff spacing 26mm Standoff height 22mm ZIP tie slot is 3x1.5 mm so I would recommend ZIP width of 2.5mm and even better would be 1.9-2.2mm width to match flexibility and scale. I used TPU with 64D hardness which I would call semi flexible 0.2 resolution 2 walls 15% infill Build plate only supports
Statistics
Likes
0
Downloads
0