oil cooled Suzuki dual carb adapter
Description
this was an adapter I made for my Katana 600 swapped cb750c, can be printed on a 300x300mm bed, ports are port matched to the 32mm on the head, adapter end is 46mm OD, inner is 38mm for kenada 38mm lectron clones will need to have a silicone boot with hose clamps and use washers in addition to oem mounting hardware, may or may not fit an oem kat or oil cooled gsxr, though port spacing and mounting should be the same if you want to remix it. also this is a prototype and most plastics will not hold up to the temperatures and gas exposure when used, so take the heat and chemical resistance into account when choosing a material.
Statistics
Likes
0
Downloads
0