Leatherman Bit Holder and Ratchet Driver
Description
I made this quick remix to use the ratchet driver instead of the extension. There are modifiers on the object which are needed to smooth everything out and make fitment work well, so leave those. You can print this with or without supports (really just for the upper part if you need it). Print standing up and use a brim if you don't trust your plate adhesion. If printing in 0.2mm layer height, you can pause the print at layer 69 and insert a 12x3mm magnet to help secure the ratcheting extension although it's not necessarily needed.
Statistics
Likes
0
Downloads
0