Mister Pi - Audio Pi Case - a Props It Yourself design

Mister Pi - Audio Pi Case - a Props It Yourself design

Description

Designed this for Taki udon contest to win a turbo pack mister PI. Enjoy playing your mister pi using this case where you can open the tape latch with the push of a button. All the buttons are clickables, the front ones are based on this design to make them fidgety : https://www.printables.com/model/968140-fidget-button-fidget/files I've used a mister pi 3d model for reference that i've found on printables, so some holes for the connectors may be a bit off, let me know if something needs updating. You should be able to put it together using some m3x7mm screws for the body ( x12) 2 x 4mm OD compression springs for the opening, two elastics for the eject button, and 4 m2x3mm screws for each tape you make. More in the pictures, all the hardware is highlighted in deep red with the rest being gray. Put the circuit inside and put the main box together first, then you should be able to slide the remaining front part, and tape recess once you put the elastic band inside)

Statistics

Likes

0

Downloads

0

Category

Video Games