Losmandy Mount for Canon 300mm F4 "L"
Description
Here are the files to build Losmandy Mount Rings for a Canon 300mm F4 "L" (non-IS). I have been successfully using them with a 1600MM Pro camera and a filter wheel. The parts are printed in PETG (PLA is not recommended), with strong infill: 100% for the back parts and 50% for the front parts. The cross-sections are overbuilt, so this level of infill is probably unnecessary—but filament is cheap compared to the mounted gear! 😉 There are two mini Vixen clamps for mounting accessories (in my case, a mini PC and a Pegasus PPB Mini). Disclaimers: - I have not checked the compatibility of these rings with Canon camera bodies. - I decline all liability for any damage or incidents resulting from the use of this design. Additionnal parts are : - various M4 screws and inserts (OD5.5mm) - Losmandy dovetail : https://urls.fr/3TwVU1 - 220mm mini vixen rail : https://urls.fr/RntvNu - Mini vixen clamp (x2) : https://urls.fr/4sOCIv Remixes are encouraged! Cheers, Helyis
Statistics
Likes
0
Downloads
0