Mlok Cover
Description
This is an M-LOK Cover that is inspired by the Magpul Type 2 covers. It also is compatible with the original, so mix and match to your liking. Or use as a spare part. Included are two different textured covers as examples and one blank cover STEP-File for your own textures. One is ribbed, the other has a nubbed texture. Print orientation is IMPORTANT! As seen in the pictures, the middle part needs to be printed at an angle (45,4° if not automatically aligned in Slicer). I have tested all other possible orientations, and all, but this one cracked the part upon disassembly. The main part needs to be printed standing up, so the locking lugs can bend outwards and dont crack. I recommend printing with: - max. 0,16mm layer height - min. 3 walls - min. 15% infill (Cubic/ Giroid) - Tree-Supports (tune for easy removal) - min. 2mm Brim for the middle part - PLA and PLA+ have worked fine - For cleanest look, paint seams
Statistics
Likes
0
Downloads
0