Toxic Ocean Guitar Pedal Enclosure
Description
This one's for you, reddit friend from r/diypedals! All components in the full build are basic electronics that are commonly found on the usual big online marketplaces. This enclosure was designed to fit: 3x potentiometers 1x on/on switch 1x 5mm LED 1x 3PDT foot switch 2x guitar jacks 1x 9V barrel jack 1x PCB prototype board (the number of through holes along the dimensions is 14x20, the roughly taken measurements for the mounting holes are shown in one of the pictures) Good luck finding screws that fit, I dug mine out from my RC car screw box and went with it. The PCB was mounted with the screws that usually come with standard sized servos, and the screws holding the top and bottom together are the mass produced self taping screws you find in Tamiya kits. A drill and your own hardware should fix any supply issues ;) This is this projects final form. I built a guitar pedal circuit, just needed somewhere to stick it. My next pedal will have another unique design. IMPORTANT (but not required): If you use this design, or find inspiration from it, please share it back as a "Make" or "Remix".
Statistics
Likes
0
Downloads
0