2DS Replacement Top Plate with USB C Connector
Description
Top faceplate for 2DS that allows you to add USB to your 2DS with very minimal changes to the device. Faceplate is setup to be printing face down. Would recommend adding minor supports for the existing charging port cut out. Used this charging port: https://www.digikey.ca/en/products/detail/sparkfun-electronics/BOB-15100/9770720?gQT=1 and 30 gauge wires. Planning to only use USB A to C with it to be safe. Just need to connect the vbus to right pin on the existing charging port and the ground to the left pin. Works great and avoids having to destroy the existing one. Used these scans for the base model: https://bitbuilt.net/forums/index.php?threads/nintendo-2ds-console.6382/ but cleaned it up a bit. <b>NOTE: I used this on a 2ds that didnt have the antenna that the old US one had. May need to be adjusted to work with that.<b>
Statistics
Likes
0
Downloads
0