Flashlight Tripod Adapter
Description
**Flashlight Tripod Adapter** Here is a simple adapter so that you can mount a flashlight that is under 30mm in diameter onto a tripod. It features a light snap hold as well as a slot for using a velco wrap to hold the flashlight in place. Fits onto any regular 1/4"x20 tripod screw, the threads printed fine at 0.2mm layer heights in PLA and PETG. The adapter was designed to fit my ***Olight Seeker 4 Pro***, but may also fit other flashlights that are under 30mm in diameter. You can also try printing it in TPU if you're feeling adventurous! ***Print Settings*** I printed this at 0.2mm layer height, 15% triangle infill and 3 walls in PETG since I will be using it outdoors in the summer heat. ***Recomended Material*** I recommend using PETG or flex if you're going to be using this in hot temperatures, I'm sure the model might start to deform if its printed in PLA and used outside in the heat, especially with the weight of a flashlight.
Statistics
Likes
0
Downloads
3